Modem ADSL US-Robotics USR8550 em Florianópolis

PERFEITO FUNCIONAMENTO
System Features
This section introduces the system features of the ADSL Ethernet modem.
Standards Compliance:

ITU-T G.992.1, G.992.2, and ANSI T1.413 Issue 2
Handshake Protocol: defined in ITU-T G.994.1
IEEE 802.3 10BaseT physical layer specification

Hardware Features

Discrete Multi-Tone based ADSL physical layer.
Rate adaptive with maximum downstream data rates up to 8Mbps and upstream data rate up to 640Kbps.
10BaseT Ethernet interface, compliant with IEEE 802.3.
Status LEDs indicating Ethernet and ADSL activity.
Restart and operate automatically after the input power is restored from a power failure.
Management console support.

Software Features
Multiple data encapsulation formats support

RFC 2364 PPP over ATM AAL5
RFC 2516 PPP over Ethernet with third party client
RFC 1483 (bridge and routing mode) multi-protocol encapsulation over ATM AAL5
RFC 1577 Classical IP and ARP over ATM

ATM support

ADSL physical connection supports ATM AAL5
Support for 8 PVCs
End-to-end OAM loopback

Network Access

IP routing protocols: Static routing and RIPv1, v2
802.1d transparent bridging
DHCP server automatically assigns IP addresses to PCs on the LAN
NAT enables multiple PCs on the LAN to access the Internet via single public IP address

Network management

Web-based configuration software
TFTP firmware upgrade and configuration backup and restore
TELNET server for remote management
SNMPv1 agent
MIBs support with RFC1213, RFC1493 (bridged mode only), RFC1573, RFC2662

Security

password protected system management terminal
PAP/CHAP authentication for PPP mode

Environmental Constraints
This ADSL Ethernet modem should be operated in an ambient temperature environment of 0 to 50 degree C. The Ethernet modem should be stored in an ambient temperature environment of -10 to 70 degree C and relative humidity in the range of 10% and 90% non-condensing.

Contato: (48) 8407-4881 ou 8458-6112
Email: andregm3@hotmail.com